Cosmetic Container Making Machine

General Description

The products made by cosmetic container making machine don’t have any disfigurement. It can present the perfect mouth, bottom and line, as well as the better transparence and higher rigidity.

Definition of direct temperature control method for the injection molding machine

Melted resin into the mold cavity, preform molding directly adjust the temperature at the same time, you do not need to reheat process, extrusion blow molding station to move as soon as possible.
The cosmetic container making machine’s bottle embryo will retain heat, and when the temperature peaked at this point before on its surface temperature distribution of preform under the most appropriate point it will do the extrusion blow molding. Therefore, forming production of high added-value products can be stabilized, and also more economical.

Blow molding type: Injection blow molding
Applicable Materials:PE, PP, PS, SAN and other thermoplasticity resin raw materials
Maximum Capacity:2000ML container
Note:We can provide customized cosmetic container making machine and mould according to client requirement to meet the special need of your product.

Applications

With high quality and accuracy, our plastic cosmetic bottle making machine is applied to produce cosmetic container and eye black tube and so on.

Pictures of the Ready-made

Series of Whirlwind WIB Injection-Blow Molding

Advantages

1. Automatic performing input and ready bottle output system.
2. The plastic cosmetic bottle making machine adopts the overall structure of super-standard anti-vibration design, and the high-speed operation state of the machine will shake down to a minimum.
3. The cosmetic container making machine adopts modular assembly method, thus greatly decrease the local amendments due to technological improvements when the machine is on process.
4. The structure of the plastic cosmetic bottle making machine oven adopt the international most advanced energy-saving technology of infrared radiation heating, temperature control with automatic negative feedback, closed-loop regulation model.
5. Automation controlling item of the cosmetic container making machine adopts international high-end computer system, heating, collecting and measuring perform temperature with simulation input and output module.
6. Man-machine interface displays current production situation, available for on line switching, parameter modification and production accounting, with automatic alarm, automatic fault detection and diagnose.\function.

Main Specifications for Cosmetic Container Making Machine

NO	Item	Unit	Data	NO	Item	Unit	Data	NO	Item	Unit	Data
1	Screw Diameter	mm	50	6	Blow Clamping Force	KN	65	10	Compressed Air	Mpa	0.6~1.2
2	Screw Speed	r/min	0~180	7	Production Speed	pcs/h	1100~2000	11	Cooling Water	bar	1~3
3	Theoretical Injection Capacity	g	265	8	Motor Power	KW	18.5	12	Dimension of Machine	cm	330×140×220
4	Injection Clamping Force	KN	280	9	Heater Capacity	KW	11	13	Machine Weight	Kg	4500
5	Suitable Materials	PP PE PS SAN

Product-related Configuration/ Parts

No.	Item	Brand
1	All Hydraulic Valve	YUKEN
2	Variable Pump	YUKEN
3	Seal Ring	HALLITE
4	Hydraulic oil motor	INTERMOT
5	Cylinder Air Valve	SMC
6	Air Cylinder	SMC/AIRTAC
7	PLC	OMRON
8	Rotation Plant Servo Motor	OMRON
9	Low-voltage electrical components	Schneider
10	Temperature controller	OMRON
11	Material used for mould	Mould Stainless Steel