Automatic PP Bottle Blow Molding Machine

General Description

The products made by automatic PP bottle blow molding machine don’t have any disfigurement. It can present the perfect mouth, bottom and line, as well as the better transparence and higher rigidity.

Blow molding type: Injection blow molding
Applicable Materials:PP and other thermoplasticity resin raw materials
Maximum Capacity:2000ML container
Note:We are the professional blow molding machine supplier for PP bottle in China and can provide customized automatic PP bottle blow molding machine and mould according to client requirement to meet the special need of your product.

Applications

With high quality and accuracy, our machines are mainly used to produce medicine bottle, health care products, cosmetic container, eye black tube, bottle for chemical use or pesticide and so on.

Features

1. Combined heating and blowing in one machine, this automatic PP bottle blow molding machine is stable and high-efficient without skillful worker.
2. High-speed PLC is adopted from OMRON, with multi-language HMI, easy for operation, stable in technical parameter.
3. Stable and longer in service life.
4. IR LAMP which is most efficient for PET heating and is fully considered for lower power consumption and higher production efficiency.
5. Close-loop heating control system with corresponsive high accurate digital meter, make sure stable heating, energy saving and not to be affected by fluctuated voltage.
6. Imported servo system is used to the conveying of the preform. The automatic PP bottle blow molding machine provides quick response, stable operation, and no shaking; Replaceable heating base heads make the operation and maintenance in low cost.
7. Turn key project is offered for the PP preform design and production, and bottle blowing.

Pictures of the Ready-made

  • Medicine bottles
  • Cosmetic bottles
  • eye black tube
  • health-care product bottles
  • bottle for chemical use or pesticide

Series of Whirlwind WIB Injection-Blow Molding


  • Blow Molding Injection Preform

  • product Preform up

Advantages

1. This automatic PP bottle blow molding machine produces more finished bottles per cycle per hour without deflashing and trimming.
2. It has been designed to make plastic bottle containers with exacting weight, size, volume, tolerance and quality.
3. The weight of the product can be pre-set with excellent mechanical strength, impact –resisting and non-cracking.
4. There is no joint seam at the bottom, and the bottle strength is improved accordingly.
5. Higher efficiency, lower energy consumption, better configuration.
6. Advanced and accurate temperature control system.
7. The cause of the production, no scrap, saves the raw material.

Main Specifications of Automatic PP Bottle Blow Molding Machine

NO Item Unit Data NO Item Unit Data NO Item Unit Data
1 Screw Diameter mm 50 6 Blow Clamping Force KN 65 10 Compressed Air Mpa 0.6~1.2
2 Screw Speed r/min 0~180 7 Production Speed pcs/h 1100~2000 11 Cooling Water bar 1~3
3 Theoretical Injection Capacity g 265 8 Motor Power KW 18.5 12 Dimension of Machine cm 330×140×220
4 Injection Clamping Force KN 280 9 Heater Capacity KW 11 13 Machine Weight Kg 4500
5 Suitable Materials PP

Product-related Configuration/ Parts

No. Item Brand
1 All Hydraulic Valve YUKEN
2 Variable Pump YUKEN
3 Seal Ring HALLITE
4 Hydraulic oil motor INTERMOT
5 Cylinder Air Valve SMC
6 Air Cylinder SMC/AIRTAC
7 PLC   OMRON
8 Rotation Plant Servo Motor OMRON
9 Low-voltage electrical components  Schneider
10 Temperature controller  OMRON
11 Material used for mould Mould Stainless Steel